Vancouver area shops for front ball joint/end links/tie rod job? | FerrariChat

Vancouver area shops for front ball joint/end links/tie rod job?

Discussion in 'Canada' started by Nero F430 Spider, Dec 13, 2020.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. Nero F430 Spider

    Nov 23, 2020
    22
    Vancouver BC
    Full Name:
    terry
    Hi All,
    anyone had this done recently? just looking for any local shops you were happy with. thanks again. terry.
     
  2. greyboxer

    greyboxer F1 World Champ

    Dec 8, 2004
    12,282
    South East
    Full Name:
    Jimmie
    Ask also in the Vancouver/BC section
     
  3. mike32

    mike32 F1 Veteran

    May 13, 2016
    5,828
    Isle of man- uk
    Easy enough to do yourself and save a huge lot of money in labour
     
  4. honda corse

    honda corse Karting
    Rossa Subscribed

    Jul 20, 2011
    150
    Vancouver & Whistler
    Full Name:
    mark buchmann
    For this type of work I would go with a trusted independent mechanic. I swear by Advance Automotive in Richmond BC, been going there for over 20 years. If you want a referral and more details DM me.
     
  5. Nero F430 Spider

    Nov 23, 2020
    22
    Vancouver BC
    Full Name:
    terry
     
  6. Nero F430 Spider

    Nov 23, 2020
    22
    Vancouver BC
    Full Name:
    terry
    Hey Mark, so they're good with doing high end cars? a referral would be great. thanks !
     
  7. Nero F430 Spider

    Nov 23, 2020
    22
    Vancouver BC
    Full Name:
    terry
     
  8. Nero F430 Spider

    Nov 23, 2020
    22
    Vancouver BC
    Full Name:
    terry
    hey bud, wheres the Van/ BC section?
     
  9. nismodrifter

    nismodrifter Formula Junior

    Jun 11, 2008
    528
    YYC/YVR
    Full Name:
    Navdeep
  10. tbakowsky

    tbakowsky F1 World Champ
    Consultant Professional Ferrari Technician

    Sep 18, 2002
    19,349
    The Cold North
    Full Name:
    Tom
    Just make sure the folks doing this job are familure with the procedure. These ball joint require a speacial adhesive and should be heated to the recommended temperature in an oven on order to cure the adhesive. It is not a simple pop on and pop out service.
     
  11. Nero F430 Spider

    Nov 23, 2020
    22
    Vancouver BC
    Full Name:
    terry
  12. Nero F430 Spider

    Nov 23, 2020
    22
    Vancouver BC
    Full Name:
    terry
    thanks tom !
     
  13. Gary Sandberg

    Gary Sandberg Formula Junior

    Two independent shops I can highly recommend:

    Forza 1 Motorsports (had done all ofthe suspension bushings on my 328 GTS prior to my purchase)

    Eurolux Motors International
     
  14. Nero F430 Spider

    Nov 23, 2020
    22
    Vancouver BC
    Full Name:
    terry
    Hey thanks Gary, appreciate it !
     

Share This Page