Nice... I'm doing the same thing (albiet not to that degree of cleanly-ness!) on my 360 as well. Started off with a simple brake job.... then one thing leads to another, and she's getting all cleaned up.
The more stuff I pull more corrections and rusted bolts and screws I find never would thought it was that dirty .
Most of the corrosion and rust was from the standard 360 cast iron brakes . Now with the carbon ceramic brakes it will stay cleaner longer eliminate most of this stuff
oh so fine! rolling art should not stop with ceramic paint coating........ the mech bits should look top notch..... represents a well maintained auto!
This tray from AutoZone is fantastic for big messy jobs while working in your garage . Image Unavailable, Please Login
just in case some one would like to swoop out to stainless bolts you can not use stainless bolts on critical loaded stuff like suspension , steering stuff . The minimum grade blots for automotive use is grade 5 . The Ferrari bolts are rated number 8 . I am pretty sure no would want to do that but just in case they did I thought they should know. Stainless bolts are graded number 3
I use "borrow" my wife's christmas ornament tupper ware covers for drip tays whilst cleaning the ferrari....... she does not know, but I'm certain she would support this method
I am pulling all the suspensions parts control arms upper and lower, replacing flamblocs dust covers ball joints and the replacing the standard 360 stock springs too CS titanium springs .
Image Unavailable, Please Login Image Unavailable, Please Login Image Unavailable, Please Login Image Unavailable, Please Login
I used a very high grade primer and then used 3M paintable undercoating and then painted black, should be allot easier to keep clean and look like new again
Wend I pulled the 360 standard side skits off they where full of gravel and dirt, there is just over one inch gap that is wright in front of the rear tire that allows dirt and gravel inside the side skirt . I had some extra gravel guard gasket cut it to fit so it will block off gavel and dirt
From what I have heard all the CS striped cars are decals and cleared over, and if the are not cleared over they are after market stripes. you can buy a factory striped decal still Eurospares has them in stock 262.40
Image Unavailable, Please Login Go to parts catalogue Ferrari 360 Challenge Stradale TRICOLOUR STRIPE Part No: 67749200