Sun visor clip | Page 2 | FerrariChat

Sun visor clip

Discussion in '365 GT4 2+2/400/412' started by bundas, Jul 16, 2015.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

Page 2 of 5
  1. samsaprunoff

    samsaprunoff F1 Rookie
    Silver Subscribed

    Jun 8, 2004
    4,188
    Edmonton, AB Canada
    Full Name:
    Sam Saprunoff
    #26 samsaprunoff, Jul 26, 2015
    Good day Mitchell,

    My 365's clip is the same as the picture that Scott posted earlier. I also posted a link in my previous post about a fellow (Fchat handle 365GTC/4) that made a batch of these. Perhaps contacting him to see if he still has some available?

    Cheers,

    Sam
     
  2. bundas

    bundas F1 Veteran
    Owner

    Dec 31, 2005
    7,090
    lexington ky usa
    Full Name:
    mitchell barnes
    #27 bundas, Jul 26, 2015
    I PM the guy to see if he had any left. They have not started on mine
     
  3. SouthJersey400i

    SouthJersey400i Formula 3

    Mar 14, 2007
    1,606
    Romulus, NY (Finger Lakes)
    Full Name:
    Ken Battle
    #28 SouthJersey400i, Jul 26, 2015
    bundas
    What material will yours be made of? Someone made a few sets a couple of years ago. I bought a pair and they worked great until first hot day. The plastic lots is dimensions and visor would not stay in place. I got pair that were not made a glass re-enforced plastic, others were okay with correct material.
    Ken
     
  4. bundas

    bundas F1 Veteran
    Owner

    Dec 31, 2005
    7,090
    lexington ky usa
    Full Name:
    mitchell barnes
    #29 bundas, Jul 26, 2015
    I sent the sample off. Should hear about it this week. I sent a message about the ones that Sam referred to as well
     
  5. rrbnut

    rrbnut Formula Junior

    Jan 19, 2015
    264
    Carlsbad San Diego
    Full Name:
    Klaus Reichardt
    #30 rrbnut, Aug 10, 2015
    I sent Scott's picture on to a eupe guy I found;he states that
    ET-Nr 95408008 replaces 152-64-854-00 fyi
     
  6. MathKernelKing

    MathKernelKing Karting

    Jun 16, 2015
    76
    San Francisco, CA
    Full Name:
    Noah
    #31 MathKernelKing, Aug 25, 2015
    I'd like to purchase a sun visor clip if the sample turned out well.
     
  7. bundas

    bundas F1 Veteran
    Owner

    Dec 31, 2005
    7,090
    lexington ky usa
    Full Name:
    mitchell barnes
    #32 bundas, Aug 25, 2015
    And other than receiving it I have not heard one word. I lost the company name😞 and have been hoping they would contact me. So I will dig around and see if I can find same
     
  8. bundas

    bundas F1 Veteran
    Owner

    Dec 31, 2005
    7,090
    lexington ky usa
    Full Name:
    mitchell barnes
    #33 bundas, Sep 8, 2015
    I should have a quote tomorrow. The photo the Scott posted is the same clip as the Bitter I just bought😊 another not obtainable item
     
  9. Bud Byrnes

    Bud Byrnes Rookie

    Sep 13, 2014
    23
    #34 Bud Byrnes, Sep 8, 2015
    Did anyone succeed in getting the sun visor clips made?
     
  10. Bud Byrnes

    Bud Byrnes Rookie

    Sep 13, 2014
    23
    #35 Bud Byrnes, Sep 8, 2015
    Scot, where in the USA can you get Lancia interior parts?
     
  11. bundas

    bundas F1 Veteran
    Owner

    Dec 31, 2005
    7,090
    lexington ky usa
    Full Name:
    mitchell barnes
    #36 bundas, Sep 8, 2015
    I tried to find the Lancia clips. zero luck. I should have a time and price tomorrow
     
  12. bundas

    bundas F1 Veteran
    Owner

    Dec 31, 2005
    7,090
    lexington ky usa
    Full Name:
    mitchell barnes
    #37 bundas, Sep 9, 2015
    $1,000 up front for CAD and two samples. $50 ea. clip. Any comments? Two weeks from sample for first print.
     
  13. dstacy

    dstacy F1 World Champ
    Owner Rossa Subscribed

    Jan 23, 2006
    11,784
    GMT -5 & GMT +1
    Full Name:
    Dave
    #38 dstacy, Sep 9, 2015
    I prefer to pay $50 for mine rather than $500 :D
     
  14. MathKernelKing

    MathKernelKing Karting

    Jun 16, 2015
    76
    San Francisco, CA
    Full Name:
    Noah
    #39 MathKernelKing, Sep 9, 2015
    I'd pay $50 per clip. I need 2 - one for left and right. That seems high, but then again, you're probably the only one in the world that has the ability to get them produced.
     
  15. bundas

    bundas F1 Veteran
    Owner

    Dec 31, 2005
    7,090
    lexington ky usa
    Full Name:
    mitchell barnes
    #40 bundas, Sep 9, 2015
    Remember that up front $1,000. That has to be recovered😩. Yes sets makes these costly. Right? That's $50 for ea. clip plus another $100 per pair. Wam!bang! $200 a set😳
     
  16. MathKernelKing

    MathKernelKing Karting

    Jun 16, 2015
    76
    San Francisco, CA
    Full Name:
    Noah
    #41 MathKernelKing, Sep 9, 2015
    I will purchase 2 sunvisor clips for $50 each. I do not need more than that.
     
  17. bundas

    bundas F1 Veteran
    Owner

    Dec 31, 2005
    7,090
    lexington ky usa
    Full Name:
    mitchell barnes
    #42 bundas, Sep 9, 2015
    They will cost $200 a pair😕
     
  18. Bud Byrnes

    Bud Byrnes Rookie

    Sep 13, 2014
    23
    #43 Bud Byrnes, Sep 9, 2015
    I've made hard to find parts before; for example Lola T200-204 rear up rights, etc...
    So, is your price $50 ea. plus a surcharge of $50? I need one, but perhaps you could clarify your pricing?
    FWIW: I always built in my cost recovery into my pricing. I would guess that your going to sell far more than 20 clips, based on the length of this thread...
     
  19. dstacy

    dstacy F1 World Champ
    Owner Rossa Subscribed

    Jan 23, 2006
    11,784
    GMT -5 & GMT +1
    Full Name:
    Dave
    #44 dstacy, Sep 9, 2015
    My first race car was a T204.
     
  20. Bud Byrnes

    Bud Byrnes Rookie

    Sep 13, 2014
    23
    #45 Bud Byrnes, Sep 9, 2015
    dstacy, Even though I won the 2001 Vintage Auto Racing Association Formula Ford Championship with my Lola T-204; it was the most evil hard to drive car I have ever had! We worked for years to get it to be stable under braking, but it would still snap spin under braking! Love my '67 Lotus Élan and my '63 Elva Courier...
     
  21. dstacy

    dstacy F1 World Champ
    Owner Rossa Subscribed

    Jan 23, 2006
    11,784
    GMT -5 & GMT +1
    Full Name:
    Dave
    #46 dstacy, Sep 9, 2015
    You used the brakes in a T204??? Oh you silly man :D
     
  22. bundas

    bundas F1 Veteran
    Owner

    Dec 31, 2005
    7,090
    lexington ky usa
    Full Name:
    mitchell barnes
    #47 bundas, Sep 10, 2015
    I sent my remaining sample and $1,000. Now wait and see time.
     
  23. bundas

    bundas F1 Veteran
    Owner

    Dec 31, 2005
    7,090
    lexington ky usa
    Full Name:
    mitchell barnes
    #48 bundas, Sep 25, 2015
    Last edited by a moderator: Sep 7, 2017
  24. bundas

    bundas F1 Veteran
    Owner

    Dec 31, 2005
    7,090
    lexington ky usa
    Full Name:
    mitchell barnes
    #49 bundas, Sep 28, 2015
    Too brittle. I could tell. They were hard as a rock. Broke on first try. Both. The one I sent was flexible 😞😦
     
  25. tbakowsky

    tbakowsky F1 World Champ
    Consultant Professional Ferrari Technician

    Sep 18, 2002
    19,387
    The Cold North
    Full Name:
    Tom
    #50 tbakowsky, Sep 28, 2015
    They look awfully similar to Mercedes.
     
Page 2 of 5

Share This Page