Brake caliper rebuild kit?
ABS computer: search Ebay for "ATE E5LC-2C219-AA". Same unit but from a Lincoln for about 1/1000th the price.
Is there any interchange part for the shockdamper lower and top bushes ? They cost alot in europe. I found some cheaper ones on Superformance.co.uk and ordered them but i didnt got any reply from them since the order and its days ago maybe they are out of business i dont know. Only other source i found is maserati it seems that atleast the top bushes are also used in some maseratis and they charge half the price but if they realy fit i dont know.
I found out that many cars share a similar ABS system as the 348. I fixed my brake problems with a Saab 9000 ('93) pressure switch. Saab part number for the pressure switch is 8994071 and GM / AC Delco part number 25530882. It can be found on Amazon for around $80. Search google for "Teves mark 2" and you can find a lot of information. This article was very helpful while troubleshooting brake problems: Ford Thunderbird - ABS Anti-Lock Brake System
Just cross referenced this on the 355 interchangeable parts sticky; This part is NLA. F7192 (Actually a Victor Reinz part number) has been discontinued. Ferrari # 154984 = Felpro 60155. I have not verified this, however, going to buy 4 tomorrow from Advance Auto and I will update. BTW, the Advance part number is 60155 for $2.59 each, pretty cheap!
Are these gaskets for the pressure switch where it goes into the three-way block? Mine seems to be leaking (See picture) although this is on a F355...I wonder if I need to get the whole assembly or if I can get by with the gasket? Does the brake fluid need to be drained from the system when replacing this? Thank you. Image Unavailable, Please Login
Hello This is my first post. I am from Portugal and we´d like to have information about possible sourcing for this part, and suppliers. If possible in Europe. Thank You
Does anyone know the part no for a 348TS wiper motor? (it maybe 0390246312 but could do with confirmation). If you have some photos of the plug as well that would be great
Just bought an Alternator adjuster bearing part# 177436 from Maranello and it came in an SKF box.... Image Unavailable, Please Login Image Unavailable, Please Login
Any advice on where I can pick up 2 lower door sections for my 348 so I can remove the strakes? The ones on eBay ATM are in pretty bad shape. Or, anyone know if tubi Japan is still making them?
Found a near perfect replacement Nipondenso alternator for a 348. As I said before, it is a near perfect replacement. It only puts out 70 Amps but I have been using it for a couple of months and have put 500 miles on it and it keeps my battery charged. I also had to put a small spacer (1/4 in) on the adjustment bracket but the lower bracket lines up perfectly. The bolts comes out of the side but there was plenty of wire to put in place. Here's a link to the post I made about the upper bracket for ref. http://www.ferrarichat.com/forum/142802126-post26.html It's a Tough One, sold at Advance Auto, the PN is 14809. It fits a 91 Toyota Corolla. Cost, $78 bucks, I kept my core, so, that added another $35, but still a good price. I was also able to find a 130 Amp alternator for a 91 Corolla on eBay for about the same price. I couldn't find a part number for it though. This is a good option if your alternator was not rebuildable like mine. Toyota Corolla 130Amp High Output Alternator 1988 1991 | eBay
I have a 348 complete (without gearbox)engine who suffered from a broken belt. What i don't have is; -heads -cams -rods -liners -crank If you need something; PM me.
Here is another option for those that can't find the SKF bearing. Alternator belt tensioner bearing - Fafnir 9107PP / Timken 9107PP The Fanfnir bearing came in the Timken box. Same part number on the box as stamped on the bearing race.
Bought a couple of 3.8bar/55.1psi fuel pressure regulators from Napa auto parts. They are made by Echlin and cost me $70 each, and the part number is CRB 219624. When looking them up on Napa, they come up listed for a 1991-1993 Mondial T. Here are some other cross reference numbers: AIRTEX: 5G1127 ACDelco: 2173329 Bosch: 0280160738 BWD: 22863 CarQuest: PR298 Ferrari: 147281 GP Sorensen: 800410 Kemparts: 143865 Niehoff: 22863 Standard motor Products: PR289 Wells: PR440 Image Unavailable, Please Login Image Unavailable, Please Login Image Unavailable, Please Login Image Unavailable, Please Login
Has anyone created a spreadsheet that summarizes all these great additions in the thread? 😁 Sent from my iPhone using Tapatalk
Hey ernie. ... Those the non barbed type replacement? I know there are 2 versions right? Mobilized reply by Dahveedem
YES! The 348 has 2 versions for the FPRs. The replacement version I listed (for Bosch part #0280160738) you must have threaded connectors on both ends of the fuel line going to the regulator, and going to the pump. The other type (the one I replaced, Bosch part #0280160715) only has the threaded fitting at the pump, and a fitting on the FPR to slip the fuel line on. So before you order MAKE SURE what type fuel lines you have, or may need to get.